Totalizer/Counter Alarms; Alarm Inhibition Time; Blackout Alarm - Seneca MyALARM2 Series User Manual

19. TOTALIZER/COUNTER ALARMS

A counter/totalizer alarm value can be set in the "Totalizer/counter settings" section. Both
totalizers and counters are included because counters can be used as partial values.
19.1.

Alarm inhibition time

An inhibition time on the next alarm can be set. The alarm is ignored during inhibition time. This
time is reset after each alarm.

20. BLACKOUT ALARM

An alarm can be set for a continuous blackout for a settable time in the "Blackout Alarm" section.
The alarm can also be enabled when power returns.
NOTE
In many situations it is convenient to receive an SMS whenever MYALARM2 turns on to activate
the power return alarm.
ATTENTION!
Activating the power return alarm, both alarms will be generated each time the card is turned
on/off.
20.1. Alarm inhibition time
An inhibition time on the next alarm can be set. The alarm is ignored during inhibition time. This
time is reset after each alarm.
USER MANUAL - MyALARM2 SERIES
58