Myalarm2 Security Audio" Model; Sending An Alarm Via Audio Message Without Receipt Confirmation; Sending An Alarm Via Audio Message With Receipt Confirmation - Seneca MyALARM2 Series User Manual

29. "MyALARM2 SECURITY AUDIO" MODEL

The MyALARM2 security audio model can also send audio messages in the event of an alarm.
These audio messages must reside in the microSD. A microSD with pre-recorded messages in 5 languages is
included in the package: Italian, English, French, Spanish and German.
Custom audio alarm messages can be recorded using the setup software.
Up to 83 different audio messages can be recorded.
ATTENTION!
• A "voice" type SIM must be used to use audio functions
• The microSD supplied on MyALARM2 must always be inserted to use audio functions
29.1. Sending an alarm via audio message without receipt
confirmation
A pre-recorded audio message or a different one can be recorded using a PC with microphone for each
alarm.
The audio call is made by the first number in the set group. If this number answers, any subsequent
numbers in the group are ignored.
Otherwise, if the first number in the group does not answer the call, MyALARM2 moves on to the second
and so on until a number in the group answers. If all group numbers are called, calls restart from the first.
ATTENTION!
• DO NOT hang up while MyALARM2 is making a call since the SIM answering machine may
answer. In this case, MyALARM2 will consider the call answer valid.
• Seneca recommends turning off the answering machine on phone numbers authorised to
receive audio calls.
29.2. Sending an alarm via audio message with receipt
confirmation
An audio alarm can be sent and considered "delivered£ only when "*"is pressed on the receiver phone.
When telephone key "*" is pressed, MyALARM2 security audio confirms by sending an alarm message
delivery confirmation audio message.
USER MANUAL - MyALARM2 SERIES
70