Email Use; Basic Information On Sending Emails; Outgoing Mail Server (Smtp); Smtp Authentication: User Name And Password - Seneca MyALARM2 Series User Manual

16. EMAIL USE

16.1.

Basic information on sending emails

An email is sent via connections with an SMTP type server (Simple Mail Transfer Protocol). This
server is assigned to delivering the email to the required addresses.
Each email contains the sender's address and one or more addressees.
An email address for the sender and addressee are mandatory.
Settings to send an email are provided by the email provider upon registration.
SENDER ADDRESS
MYALARM2
MyALARM2@alice.it
Details of which parameters are required to correctly set an SMTP server are provided below:
16.2.

Outgoing mail server (SMTP)

The name of the server to be used, for example, the SMTP server name smtp.gmail.con, must be
entered in SMTP server settings.
this information is also available in email setup software under the name "SMTP outgoing mail
server".
16.3.

SMTP authentication: user name and password

Connections can be made to an SMTP server with or without authentication. MYALARM2 permits
server connections via authentication with a user name and password.
USER MANUAL - MyALARM2 SERIES
SMTP
51
DESTINATION ADDRESSES
mario@gmail.com
pino@alice.it
paolo@libero.it