Alarm On Totalizer Increase - Seneca MyALARM2 Series User Manual

USER MANUAL - MyALARM2 SERIES

21. ALARM ON TOTALIZER INCREASE

Up to 4 alarms can be set in the "Alarm on input increase" section (1 per input) for high or low
totalizer increase. These alarms monitor flows (gas, liquid, etc.) or warn in the event of energy
generator malfunctions (photovoltaic, panels, wind generators, etc.).
ATTENTION!
-To obtain coherent and synchronised values, the alarm on totalizer increase is managed by the
datalogger and thus the alarm on plant loss cannot be simultaneously activated.
- In order to obtain coherent and synchronised values, the alarm on totalizer increase is
managed by the datalogger. Times are thus shared with the logger (acquisition and send times).
59