Temperature Control Mode; Program Mode - Seneca MyALARM2 Series User Manual

24.2.

Temperature control mode

In the temperature control mode, MyALARM2 attempts to maintain the set TEconomy or TComfort
temperature.
An SMS command can be sent to switch from Comfort to economy temperature.
For the system to maintain the comfort temperature:
SET HVAC.MODE HC
For the system to maintain the economy temperature:
SET HVAC.MODE HE
ATTENTION!
Once these commands have been sent, the "program mode" and "manual mode" are disabled. The
system will regulate the boiler so as to maintain the comfort or economy temperature until the next
command.
24.3.

Program mode

In program mode, MyALARM2 uses a weekly program. The weekly program can be configured using the
configuration software.
As soon as the boiler control is configured by the software, this mode will be active immediately.
It is possible to choose at which time and on which days of the week to maintain the comfort and
economy temperature.
For the system to switch to program mode:
SET HVAC.MODE PRG
USER MANUAL - MyALARM2 SERIES
63