Seneca MyAlarm3 Cloud Quick Start

Gsm/gprs device for remote alarm and control

Hide thumbs Also See for MyAlarm3 Cloud:

QUICK START

MyAlarm3 Cloud

GSM/GPRS device for remote alarm and control

DOCUMENTATION

"MyAlarm3 Cloud"

APP

SENECA s.r.l.

Via Austria, 26 – 35127 – PADOVA – ITALY

Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287

For manuals in other languages, visit www.seneca.it/myalarm3-cloud

This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.

The content of this document corresponds to the described products and technologies.

Stated data may be modified or supplemented for technical and/or sales purposes.

MI00553-2-EN

1/4

Table of Contents

Need help?

Do you have a question about the MyAlarm3 Cloud and is the answer not in the manual?

Page 1 Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287 For manuals in other languages, visit www.seneca.it/myalarm3-cloud This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised. The content of this document corresponds to the described products and technologies.
Page 2 • Do not apply different voltages or higher voltages than indicated between terminals, or between any terminal and earth (voltages greater than 50Vdc) • Do not use the MyAlarm3 Cloud control unit if damaged, or if signs of possible damage are visible on it. • Do not remove the internal battery.
Page 3 Ambient conditions Seneca recommends use at 0 to 45°C for correct operation With the power supply present: -20 ÷ 55°C. Temperature With use of the battery (when discharged): -20 ÷ 5°C Charging is possible in the range: 0 ÷ 45°C.
Page 4 "change system "and then select the “ADD” button); (*) 5. From now on, the service is active and the control unit's owner account can access the MyAlarm3 Cloud system from both the web browser and the MyAlarm3 Cloud mobile app, as well as invite other users to use his newly activated MyAlarm3 Cloud.