Battery Fixation And Starting The Machine - Norton clipper CS 352 B Operating Instructions Manual

VERS.2023.03.15

3.4 Battery fixation and starting the machine

•
Switch on the battery by pressing the Power button (1) (the switch must be in the OFF
position) the 3 LEDs will lit.
•
Wait until the green LED on the control panel is the only one lit
•
Put the switch to ON to start the motor and the rotation of the blade (2)
NOTE: When removing the battery, remember to replace the plastic cover on the motor plug to
keep it clean.
NOTE: These operations must be done each time the motor is restarted (even if the engine has
just been stopped)
To stop the machine, put the switch on the control panel to OFF or press the emergency stop.
CS 352 B_MAN_EN
17