Table of Contents
Advertisement
VERS.2023.03.15
2.4
Statement regarding the vibration emission
Declared value of vibration emission following EN 12096.
Machine
Model / code
CS 352 B
HONDA
70184632546
•
Values determined using the procedure described in the standard EN 13862.
•
The measurements are made with new machines. Actual values may vary with site conditions,
in terms of:
➢ Materials worked
➢ Wear Machine
➢ Lack of maintenance
➢ Inappropriate tool for application
➢ Tool in poor condition
➢ Unskilled operator
➢ Etc...
•
The exposure time to vibration is based on the performance of work (related to the
adequacy Machine / Tool / worked material / operator)
•
When evaluating risks due to hand-arm vibration, you need to take into account effective
usage at rated power of machine during a full day of work; quite often you will realise that
effective utilisation time represents around 50% of overall duration of work. You have to
consider, of course, breaks, water feeding, preparation of work, time to move the machine,
disk mounting...
Measured value of vibration
emission at m/s
1.99
Uncertainty K
2
2
m/s
0.26
CS 352 B_MAN_EN
Tool used
Model / code
Classique Béton Ø350
13
Advertisement
Table of Contents
