Table of Contents
Advertisement
14)
Once the operation has finished, the masks will appear in the selected language.
The installed language can be checked in the "About" mask of the "Unit" menu.
Perform all the steps of the procedure. If even just one file is omitted, the following faults may occur:
No ".iup" file selected.
This means that no language has been selected and an empty mask will appear. Repeat
the operation taking care to select a ".iup" file.
No ".bin" file selected.
This means that the application file has not been selected. Press [ESC] and repeat the
operation, taking care to select the ".bin" file
No ".grp" file selected.
This means that the graphics file has not been selected. The language and the
application have been installed but the images will not be processed. Repeat the
operation, taking care to select a ".grp" file.
No file has been selected.
An error occurred while copying to the NOR memory.
An error occurred while reading the file from the NAND memory.
CRC (verification code) incorrectly calculated while copying to the NOR memory.
An error occurred while reading the file from the NAND memory.
An error occurred while writing to the NOR memory.
The file is too large to be a correct DEV file.
The file is not a correct DEV (heading not recognised).
All other situations.
INFORMATION:
If no key is pressed for a few seconds, the display will exit the configuration screen. In this case, the
procedure must be repeated.
The pCOOEM+ controller, unlike the pCO5+ controller, does not have sufficient memory for loading all the languages.
You can, however, specify the language to be loaded at the time of placing the order. This language will be loaded on the
controller together with English.
You can then select the language to be displayed from among the two in the mask of the "Info" menu available at "User" level
Version 38
Unit - About
Evolution+
Code
ME 38.00 EN
Select one iup file
ERROR : press menu select
one blb file
Select one blb file
No files selected
Error copying files
Error reading file (11)
Error reading file (12)
Error reading file (13)
Writing error (14)
DEV file not valid
Code error 9
Code error X
21
Advertisement
Table of Contents
