Mitsubishi Electric Evolution+ s-MEXT Technical Manual page 25

Mask of the terminal
PAC-IF013B-E Client
Status: ON
Mode: COOLING
Step: 11
Communication: Online
PAC-IF013B-E Client
TH11: 10.0°C
TH5: 13.0°C
TH2: 09.0°C
PAC-IF013B-E Client
TH7: 10.0°C
PAC-IF013B-E Client
Compressor Status: ON
Predefrost: OFF
Defrost: ACTIVE
Selfprotection: ACTIVE
Software ver. 000001
PAC-IF
SERVER 1

PAC-IF013B-E Server1
Status: ON
Mode: COOLING
Step: 11
Communication: Online
PAC-IF013B-E Server1
TH11: 10.0°C
TH5: 13.0°C
TH2: 09.0°C
PAC-IF013B-E Server1
TH7: 10.0°C
Version 38
Client PAC-IF info mask:
•
Status
•
Mode
•
Communication
Adjustment step
Information visible only with S-MEXT unit enabled.
Client PAC-IF info mask:
•
Suction temperature probe (TH11).
•
Two-phase temperature probe (TH5).
•
Liquid temperature probe (TH2).
Information visible only with S-MEXT unit enabled
Client PAC-IF info mask:
External temperature probe (TH7).
Information visible only with S-MEXT unit enabled
Client PAC-IF info mask:
•
Compressor status.
•
Pre-defrost.
•
Defrost.
•
Self protection.
PAC-IF SW version
Information visible only with S-MEXT unit enabled.
Mask confirming access to the Server 1 PAC-IF013B-E card additional information section.
Press "Esc" to return to the Server 1 PAC-IF013B-E card status mask.

Information visible only with S-MEXT unit and Server 1 enabled.
Server1 PAC-IF info mask:
•
Status.
•
Mode.
•
Communication.
Adjustment step.
Information visible only with S-MEXT unit and Server 1 enabled.
Server1 PAC-IF info mask:
•
Suction temperature probe (TH11).
•
Two-phase temperature probe (TH5).
Liquid temperature probe (TH2).
Information visible only with S-MEXT unit and Server 1 enabled.
Server1 PAC-IF info mask:
External temperature probe (TH7).
Information visible only with S-MEXT unit and Server 1 enabled.
Description
25