Mitsubishi Electric Evolution+ s-MEXT Technical Manual page 30

Mask of the terminal
Unit - KIPlink
Ethernet channel:
IP: 192.168.030.001
Sub:255.255.255.000
Gw: 000.000.000.000
Unit - KIPlink
WiFi channel:
IP: 192.168.030.001
Sub:255.255.255.000
Gw: 000.000.000.000
Unit - KIPlink
Network Info
SSID master:
KIPlink_032000000
IP master:
192.168.030.001
KIPlink ID: 01
Unit - Work Hours
000008h
Unit - Work Hours
000001h
000001h
000003h
Unit - N° of Starts
0000001
Unit - N° of Starts
000003h
000001h
000005h
Unit - SN
Serial Number
of the Unit
032000000
Unit - About
Evolution+
Code ME 38.00 EN
HW pCO5+ M
NAND 50MB
Flash 2MB + 7MB + 4MB
Ram 2048KB
Boot 05.01 Bios 06.52
Version 38
Display of information on the KIPlink Ethernet network.
Display of information on the KIPlink Wi-Fi network.
Display of the status and main information of the network of the KIPlink Priority
module.
Display of the operating time of the fans in the various unit configurations.
Display of the heater and humidifier operating hours.
Display of the number of unit starts in the various unit configurations.
Display of the number of heater and humidifier starts.
Display of the serial number of the unit.
This mask contains the reference information of the software [Code ME 38.00 EN].
The closed padlock symbol shows that the board is provided with its propriety
software.
The hardware information is also shown, namely the size (S, M, L), the memories
(NAND, Flash and RAM), and finally the versions of the basic software of the
controller (Boot and Bios).
Description
30