Mitsubishi Electric Evolution+ s-MEXT Technical Manual page 78

Mask of the terminal
Optional
--------------- P27.24
Maximum compensation
of cooling set: 02.0°C
Optional
--------------- P27.25
Temp. for Min compens.
of heating set: 24.0°C
--------------- P27.26
Temp. for Max compens.
of heating set: 28.0°C
Optional
--------------- P27.27
Maximum compensation
of heating set: 02.0°C
Optional
--------------- P27.33
T+H external probe
(humidity sensor):
--------------- P27.34
T+H Supply probe
(humidity sensor):
Version 38
Parameter for setting the maximum setpoint offset cooling.
Visible only if the setpoint compensation function is enabled.
Parameter for setting the start point of heating setpoint compensation.
Parameter for setting the end point of heating setpoint compensation.
Visible only if the signal type is set to REM T/H setpoint compensation and the
heating resources are present.
Parameter for setting the maximum setpoint offset heating.
Visible only if the setpoint compensation function is enabled and heating resources
are present.
Parameter for enabling the external serial T/H probe.
N
Parameter for enabling the air delivery serial T/H probe.
N
Description Par.N.
27.24
27.25
27.26
27.27
27.33
27.34
78