Rotary Switch - ICP DAS USA I-7532RM-FD Service And Usage Information

2.4. Rotary Switch

There are 4 rotary switches on the I-7532RM-FD for configuring CAN1/2 arbitration and
data phase baud rate. The descriptions are as follows.
CAN1 A_BR/D_BR  CAN1 Arbitration/Data phase baud rate
CAN2 A_BR/D_BR  CAN2 Arbitration/Data phase baud rate
A_BR (Arbitration phase baud rate) is defined as follows:
Switch
Baud (bps)
Switch
Baud (bps)
D_BR (Data phase baud rate) is defined as follows:
Switch 0
Baud CAN
(bps) Mode
Switch 8
Baud
1M
(bps)
NOTE:
1. When the D_BR switch is "0" (CAN mode), this CAN port will be set to CAN mode,
using only the setting of the A_BR switch as the CAN baud rate and not supporting
any CAN FD messages,
2. When A_BR and D_BR switches are set to "1", the baud rate of this CAN port will be
user-defined and set by the utility.
I-7532RM-FD ( 2-port CAN/CAN FD Bridge )
Copyright © 2023 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
0 1 2
User-defined 10k
8 9 A
125k 200k 250k
1
User-defined 100k
9
2M 2.5M
User Manual (version 1.0.0)
3 4
20k 40k
B C
400k 500k
2 3 4
200k 250k
A B C
3M 4M
5 6 7
50k 80k 100k
D E F
600k 800k 1M
5 6
400k 500k 800k
D E
5M 6M 10M
Page: 11
7
F