When setting "Rx CAN => CAN" or "Rx CAN FD => CAN FD", CAN or CAN FD
frame will be no changed when sent out to another port.
When setting "Rx CAN FD => CAN", CAN FD frame with large than 8 bytes data will
be cut off and only keep 8 bytes data.
When setting "Rx CAN => CAN FD":
When no checking "Stuff" item, data field of received CAN frame be no changed
and transform to CAN FD frame.
When checking "Stuff" item, received CAN frame (data length equal to 8) will be
transformed and stuffed with "stuff byte" value ; received CAN frame (data
length: 0 ~ 7) will be no changed and transform to CAN FD frame.
Can set CAN FD frame with "BRS" (bit rate switch) or not.
I-7532RM-FD ( 2-port CAN/CAN FD Bridge )
Copyright © 2023 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
User Manual (version 1.0.0)
Page: 25