Start To Use I-7532-Fd Utility Tool - ICP DAS USA I-7532RM-FD Service And Usage Information

3.3. Start to use I-7532-FD Utility tool

Figure 3-3-1 Main frame of the I-7532-FD Utility tool
[Basic]
This field is used to connect to the module and get device information, get device
configuration, configure device, load device configuration from file and save device
configuration to file.
[CAN]
This field is used to configure the CAN controller mode, CAN FD specification,
arbitration/data-phase baud rate and advanced forwarding rule.
[Filter]
This field is used to configure CAN ID filter function. Users can reject remote
standard/extended CAN ID and set acceptance standard/extended CAN ID. It uses a
whitelist filtering method and supports 128 groups of standard IDs and 64 groups of
extended IDs per port.
I-7532RM-FD ( 2-port CAN/CAN FD Bridge ) User Manual (version 1.0.0) Page: 20
Copyright © 2023 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com