ICP DAS USA I-7532RM-FD Service And Usage Information page 24

[Arbitration bit rate]
CAN/CAN FD arbitration phase bit rate. Valid range: 10 kbps ~ 1000 kbps.
[Data phase bit rate]
CAN FD data phase bit rate. Valid range: 100 kbps ~ 10000 kbps
[SP]
CAN/CAN FD arbitration/data phase bit rate sample point.
Suggested range: 75.00 ~ 87.50 %
[Forwarding Rule  Advanced settings]
Dependent on CAN controller setting, the forwarding rule may be different. The
following table list the default forwarding rule setting. User can change the default
forwarding rule on "Advanced setting" frame.
Rx CAN Tx CAN
Controller Controller
CAN CAN
CAN CAN FD
CAN FD CAN
CAN FD CAN FD
Advanced setting:
 Can set "Rx CAN => CAN", "Rx CAN FD => CAN", "Rx CAN => CAN FD" and "Rx
CAN FD => CAN FD".
I-7532RM-FD ( 2-port CAN/CAN FD Bridge )
Copyright © 2023 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Rx CAN  Rx CAN 
CAN CAN FD
Default No effect
User can set Default
Default No effect
Default User can set
User Manual (version 1.0.0)
Rx CAN FD  Rx CAN FD 
CAN CAN FD
No effect No effect
No effect No effect
Default No effect
User can set Default
Page: 24