ICP DAS USA I-7532RM-FD Service And Usage Information page 21

Hide thumbs Also See for I-7532RM-FD:

Table of Contents

[Mapping Rule]

This field is used to configure mapping rules of the device. Mapping rule is used to

modify the received CAN/CAN FD frame format (including type, format, ID, data length,

bit rate switch and data ) from one port and then transfer it to another port. It is useful for

user to change the received CAN/CAN FD format to another one. Support up to 32

mapping rules per port

[Merging Rule]

This field is used to configure merging rules of the device. Merging rule is used to

combine multiple CAN frames (Max. 8) to one CAN FD frame. It is useful for user to

combine multiple CAN frames data into one CAN FD frame. Support up to 32 merging

rules per port.

[Splitting Rule]

This field is used to configure splitting rules of the device. Splitting rule is used to split

one CAN FD frame to multiple CAN frames (Max. 8). It is useful for user to split data in

one CAN FD frame to multiple CAN frames. Support up to 32 splitting rules per port.

[Status]

This field is used to check the CAN status of the device. This field is useful for user to

check the device CAN network status (including no error, CAN bus off, error passive,

error warning status and transmit/receive error counter information).

I-7532RM-FD ( 2-port CAN/CAN FD Bridge )

User Manual (version 1.0.0)

Page: 21

Table of Contents