Table of Contents
Advertisement
Main Menu > Operation Setting > Time and Schedule > Check Current Settings
Checking the weekly/one-day schedule settings
D
When the selected groups include two or more unit types (e.g.
"air conditioners and ventilators" or "general equipment and Air To
Water (PWFY)"), the [Target group selection] screen shown on the
right appears before the [Check Current Settings] screen appears.
Select the unit type to be operated, and touch the OK button.
(This screen does not appear when the selected groups do not
include multiple unit types.)
1. Touch the "Check Current Settings" button on the [Time and Schedule] screen.
[Weekly] tab
2. Touch the [Weekly] or [One day] tab.
3. Touch the row that corresponds to the group whose schedules you want to check.
Touch the pattern number under a specific day to check the day's schedule that appears under the
pattern numbers.
Effective time for the Setback function
4. Touch the < > buttons to check the actions for each scheduled event.
Touch the "Close" button to return to the previous screen.
5. To change the schedule settings, touch the Return
screen, and access the [Set Schedules] screen.
[One day] tab
Day (Date) grid
Displays scheduled patterns
• [Weekly] screen
Displays the pattern numbers that are assigned to groups and
days. (
) will appear on the top left corner of the cell to which
one-day schedule is assigned.
One-day pattern will override the weekly pattern.
• [One day] screen
Displays the one-day schedule patterns that are assigned to
specific dates.
Seasonal settings (Weekly only)
Operation pattern numbers
Scheduled events for the selected pattern
• Appears only if the selected pattern has been configured.
• The functions not supported by the selected group will appear
underlined in red, and they will not be executed.
* Refer to P36 for icon definitions.
• The effective time for the Setback function will appear as a yellow
line on the timeline.
button to return to the [Time and Schedule]
39
Hide quick links:
Advertisement
Table of Contents
