Table of Contents
Advertisement
Retention Clip
Please follow the steps below to install the memory card into the socket.
4 5 °
Step 1
Step 2
Step 3
Quick Installation Guide | ED700-EHL22I
Key
Socket Top View
Step 1:
Insert the memory card into the slot while
making sure 1) the notch and the key
are aligned, and 2) the non-connector
end rises approximately 45 degrees
horizontally. Press the card firmly into the
socket while applying and maintaining
even pressure on both ends.
Step 2:
Press the end of the card far from
the socket down while making sure
the retention notch and the clip align
as indicated by the dotted line in the
illustration. If the retention notch and the
clip do not align, please remove the card
and re-insert it. Press the card all the way
down.
Step 3:
The clips snap automatically and abruptly
to the retention notches of the card
sounding a distinctive click, and lock the
card in place. Inspect that the clip sits
in the notch. If not, please pull the clips
outward, release and remove the card, and
mount it again.
7
Advertisement
Table of Contents
