Assembly - JLG H340AJ Service And Maintenance Manual

Assembly

TAKE CARE NOT TO LET ANY PAINT CHIPS OR DIRT FALL INSIDE THE CYLINDER.
THIS COULD CAUSE LEAKAGE.
1. Pin bushing assembly
Coat the opening with oil to aid in assembly and press
the bushing into the rod as shown below.
2. Gland seal assemblies
a. Coat the opening with oil to aid in assembly and
press the bushing into place with the proper tool.
3121634
SECTION 5 - BASIC HYDRAULIC INFORMATION & HYDRAULIC SCHEMATICS
b. Rod seal assembly (Keep the right direction and do
not make damage to seal).
P A R T 2
P A R T 1
BA R
5-55