Machine Setup - JLG H340AJ Service And Maintenance Manual

Machine Setup

When a machine digit item is selected, press the UP
DOWN arrow keys to adjust its value, for example:
GROUND ALARM:
DRIVE
The above display would be selected if the machine was
equipped with a ground alarm and you wanted it to sound
when driving. There are certain settings allowed to install
optional features or select the machine model.
When selection the machine model to match the size of the
machine, the personality settings will all default to the factory
recommended setting.
NOTE: Refer to Personality Ranges/Defaults for the recommended
factory settings.
NOTE: Password 33271 will give you access to Service Access,
which will permit you to change all machine personality
settings.
3121634
SECTION 6 - JLG CONTROL SYSTEM
CHANGING THIS SETTING MAY ADVERSELY AFFECT THE PERFORMANCE OF
or
YOUR MACHINE.
ITS IS A GOOD PRACTICE TO AVOID PRESSURE-WASHING ELECTRICAL/ELEC-
TRONIC COMPONENTS. SHOULD PRESSURE-WASHING BE UTILIZED TO WASH
AREAS CONTAINING ELECTRICAL/ELECTRONIC COMPONENTS, JLG INDUSTRIES
INC. RECOMMENDS A MAXIMUM PRESSURE OF 750 PSI (52 BAR) AT A MINI-
MUM DISTANCE OF 12 INCHES (30.5CM) AWAY FROM THESE COMPONENTS. IF
ELECTRICAL/ELECTRONIC COMPONENTS ARE SPRAYED, SPRAYING MUST NOT
BE DIRECT AND BE FOR BRIEF TIME PERIODS TO AVOID HEAVY SATURATION.
6-5