JLG H340AJ Service And Maintenance Manual page 264

Table 6-2. Machine Configuration Programming Information (Software Version P1.4)
Configuration Digit
ENGINE SHUTDOWN:
7
FUEL CUTOUT
8
TILT:
9*
* Certain market selections will alter default setting.
GROUND ALARM:
10
3121634
Number
1 DISABLED: No engine shutdown.
2 ENABLED: Shutdown engine for high coolant temperature fault or low oil pressure fault.
1 ONE RESTART: One restart with limited run time when near Empty.
2 ENGINE STOP: No starting permitted when near Empty.
3 NONE
4 RESTART: Restarts allowed with limited run time when near Empty.
1 5 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more than 5 degrees
and above elevation.
2 4 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more than 4 degrees
and above elevation.
3 3 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted more than 5 degrees
and above elevation.
4 5 DEGREES + CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 5
degrees and above elevation; also disallows drive, tower lift up, lift up, and telescope out.
5
4 DEGREES + CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 4
degrees and above elevation; also disallows drive, tower lift up, lift up, and telescope out.
6 3 DEGREES + CUT: Reduces the maximum speed of all boom functions to creep when tilted more than 3
degrees and above elevation; also disallows drive, tower lift up, lift up, and telescope out.
7 5 DEGREES + DRV CUT: Reduces the maximum speed of all boom functions to creep when
tilted more than 5 degrees and above elevation; also disallows drive and steer.
8 4 DEGREES + DRV CUT: Reduces the maximum speed of all boom functions to creep when tilted more
than 4 degrees and above elevation; also disallows drive and steer.
9 3 DEGREES + DRV CUT: Reduces the maximum speed of all boom functions to creep when tilted more
than 3 degrees and above elevation; also disallows drive and steer.
1 NO: No ground alarm installed.
2 DRIVE: Travel alarm sounds when the drive function is active.
3 DESCENT: Descent alarm sounds when lift down is active.
4 MOTION: Motion alarm sounds when any function is active.
SECTION 6 - JLG CONTROL SYSTEM
Description
Default
Number
2
4
7
4
6-9