Instructions For Using The Delta-Q Quiq Programmer Ctquiq Programming Kit - JLG H340AJ Service And Maintenance Manual

Instructions for using the Delta-Q QuiQ
Programmer CTQuiQ Programming Kit
With QuiQ Programmer CT you can:
• ­ Add a battery charge algorithm
• ­ Select a different algorithm for battery charging
• ­ Delete a battery charge algorithm
• ­ Upgrade the software in your QuiQ or QuiQ-dci charger
• ­ View charge tracking data from charger
• ­ Upload Charge Events to Delta-Q's Online Charge Event
Database
3121634
Figure 3-39. QuiQ Programming Kit
INSTALLING QUIQ PROGRAMMER CT SOFTWARE
AND DRIVERS
You will find the QuiQ Programmer CT application on the QuiQ
Programmer CT installation CD. QuiQ Programmer CT requires
a PC with a minimum of 512 MB of RAM, running 32-bit or 64-
bit edition of Windows XP, Vista, or 7.
To install QuiQ Programmer CT Insert the QuiQ Programmer
Installation CT CD into the CD or DVD drive of your PC (label
must be facing up). If the setup application does not launch
the QuiQ Programmer CT installer automatically (this will
depend on your computer's security settings and configura-
tion), click the Start button (or
My Computer; double click the drive labeled QuiQ Program-
mer CT; double click Setup.exe to launch the installer. You may
also use Windows Explorer to navigate to Setup.exe. Then fol-
low the instructions on your screen to complete the software
installation.
NOTE: If your computer is running Windows XP Professional 64-
SECTION 3 - CHASSIS & TURNTABLE
CONTENTS OF THE QUIQ
PROGRAMMING KIT (JLG PART
NUMBER: 2915230)
• ­ QuiQ USB Interface Module
• ­ QuiQ Programmer CT Installation CD
• ­ USB Cable
• ­ Wire Assembly
• ­ QuiQ Programmer CT Instructions
icon) on the taskbar; click
bit, you must install x64 .NET Framework 2.0 before install-
ing QuiQ Programmer CT. You will find x64 .NET Frame-
work 2.0 on the CD in the subfolder Net64Fx.Double click
Net64Fx.exe to start installing the software.
3-67