Table of Contents
Advertisement
Chapter 2 Useful Features
5.4
LSI Software RAID Configuration Utility and Universal RAID Utility
The points to be noted when using Universal RAID Utility together with LSI Software RAID Configuration Utility
are described below.
(1)
Terms
Some terms are different between Off-line Utility and Universal RAID Utility. When using Universal RAID Utility
together with Off-line Utility, replace the terms as shown in the table below:
Terms of LSI Software RAID Configuration
Adapter
Virtual Drive
Array
Physical Drive
Drive Group
(2)
Numbering
Numbers indicating RAID Controller configuration differ between LSI Software RAID Configuration Utility and
Universal RAID Utility as shown in the table below.
Refer to "Universal RAID Utility User's Guide" for details.
Adapter (RAID Controller)
Virtual Drive (Logical Drive)
Array (Disk Array)
Drive (Physical Device)
Drive Group (Disk Array)
150
Utility
RAID Controller
Logical Drive
Disk Array
Physical Device
Disk Array
Tips
raidcmd is a command provided by Universal RAID Utility. For details, refer to
"Universal RAID Utility User's Guide".
Item
Starts from 0
Starts from 0
Starts from 0
Starts from 0
Starts from 0
Express5800/E120g-M Maintenance Guide
Terms of Universal RAID Utility
RAID Viewer
RAID Controller
Logical Drive
Disk Array
Physical Device
Disk Array
Numbering
LSI Software RAID
Universal RAID Utility
Configuration Utility
Starts from 1
Starts from 1
Starts from 1
To be assigned based
on an enclosure that
contains the physical
device and its slot
number.
Starts from 1
5. RAID System Configuration
raidcmd
Advertisement
Table of Contents
