Lsi Software Raid Configuration Utility And Universal Raid Utility - NEC Express5800/T120e Maintenance Guidance

Chapter 2 Useful Features
4.4
LSI Software RAID Configuration Utility and Universal RAID Utility
The points to be noted when using Universal RAID Utility together with LSI Software RAID Configuration Utility
are described below.
(1) Terms
Some terms are different between LSI Software RAID Configuration Utility and Universal RAID Utility. When
using Universal RAID Utility together with LSI Software RAID Configuration Utility, replace the terms as shown
in the table below:
Terms of LSI Software RAID Configuration Utility
Adapter
Virtual disk
Array
Physical drive
(2) Numbering
The numbers indicating RAID controller information differ between LSI Software RAID Configuration Utility and
Universal RAID Utility as shown in the table below.
See "Universal RAID Utility Users Guide" for details.
Adapter (RAID Controller)
Virtual Drive (Logical Drive)
Array (Disk Array)
Physical drive (Physical Device)
100
RAID Controller
Logical Drive
Disk Array
Physical Device
Tips
raidcmd is a command provided by the Universal RAID Utility. See "Universal
RAID Utility User's Guide" for details.

Item
Starts from 0
Starts from 0
Starts from 0
Starts from 0
Express5800/T120e Maintenance Guide
Terms of Universal RAID Utility
RAID Viewer
RAID Controller
Logical Drive
Disk Array
Physical Device
Number
LSI Software RAID
Universal RAID Utility
Configuration Utility
Starts from 1
Starts from 1
Starts from 1
To be assigned based on an
enclosure that contains the
physical device and its slot
number.
4. RAID System Configuration
raidcmd