NEC Express5800 Series Maintenance Manual page 171

Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 3 Appendix
Windows Server 2012 R2
System Log
l2nd
4
Upon system startup or when applying
Starter Pack
l2nd
4
Upon system startup or when applying
Starter Pack
e1iexpress
27
Upon OS installation
e1rexpress
27
Upon system startup or when applying
Starter Pack
volmgr
46
Upon OS installation
Microsoft-Windows-
Time-Service
134
When installing an OS,
running an OS for the first time,
or applying Starter Pack
disk
153
When
creating
Universal RAID Utility
Broadcom BCM57810 #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
There is no problem with system operation.
Broadcom BCM57840 #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
There is no problem with system operation.
The description for Event ID 27 from source e1iexpress cannot be
found.
Either the component that raises this event is not installed on your local
computer or the installation is corrupted. You can install or repair the
component on the local computer.
If the event originated on another computer, the display information had
to be saved with the event.
Warning
The following information was included with the event:
Intel(R) I350 Gigabit Backplane Connection
The message resource is present but the message is not found in the
string/message table.
There is no problem with system operation.
Intel(R) I350 Gigabit Backplane Connection
Warning
Network link has been disconnected.
There is no problem with system operation.
Error
Failed to initialize crash dump.
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/2756313
NtpClient was unable to set a manual peer to use as a time source
Warning
because of DNS resolution error on 'time.windows.com,0x9'. NtpClient
will try again in 15 minutes and double the reattempt interval thereafter.
If this event is not logged after connecting with Internet, there is no
problem with system operation.
The IO operation at the logical block address for disk (PD0 name:) was
Warning
retried.
* This event message is often invalid. It is no problem.
If this event is logged when you create a logical drive using Universal
RAID Utility, there is no problem with system operation, and this can be
logical
drive
using
resolved for the characters to be displayed correctly by installing the
Microsoft update through Windows Update. For more information, see
Microsoft website.
http://support.microsoft.com/kb/2925479
Express5800/B120f-h Maintenance Guide
2. List of Windows Event Logs
171

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/b120f-h exp437a

Table of Contents