Chapter 2 Useful Features
4.3.2 Manual Rebuild
1. Replace a physical device and turn on the server.
2. Run LSI Software RAID Configuration Utility.
3. From the TOP menu, select Rebuild.
The Rebuild – PHYSICAL DRIVES SELECTION MENU screen appears.
4. Move the cursor onto the physical device displaying "FAIL", and then press the <Space> key to select it.
The color of "FAIL" indication for the selected physical device changes to pink.
5. Press the <F10> key.
6. Select Yes to start the rebuild process.
When the Completed indication in the REBUILDING screen indicates 100%, the rebuild process is
completed.
7. Press the <Esc> key to return to the TOP menu and exit LSI Software RAID Configuration Utility.
By default, rebuild starts automatically after you replace a physical device.
Tips
Replace a physical device
Run LSI Software RAID Configuration Utility
Perform rebuild process
Exit LSI Software RAID Configuration Utility
Rebuild – PHYSICAL DRIVES SELECTION MENU
ONLINE A00-00
0
FAIL
1
Express5800/B120f-h Maintenance Guide
PORT #
A00-01
4. RAID System Configuration
99