NEC Express5800 Series Maintenance Manual page 144
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Useful Features
10. Put a cursor onto iSCSI Offload Protocol and select Enabled.
Press the <ESC> key to return to NIC Partition Configuration menu.
Make sure that "ETH:iSCSI" is shown on the logical port you have configured.
To configure any other logical ports, repeat steps 9 and 10.
11. Press <ESC> key to return to UEFI Driver Configuration menu (step 7). To configure any other devices,
repeat steps 7 through 10.
12. Press <ESC> key to return to the top menu, and save changes and exit as follows:
Save & Exit Save Changes and Exit
144
Up to two partitions can be Enabled per a port.
Tip
Express5800/B120f-h Maintenance Guide
10. Advanced LAN Configuration
Advertisement
Table of Contents
