NEC Express5800 Series Maintenance Manual page 162

Chapter 3 Appendix
Error Message
Expansion ROM not initialized There is no free area for expanding
B000
B030 PCI System Error on
Bus/Device/Function
B040 PCI Parity Error on
Bus/Device/Function
Onboard VGA - PCIe Link Failure Connection failure of PCIe bus was
B200
B201 Onboard LAN 1 – PCIe Link
Failure
B202 Onboard LAN 2 - PCIe Link
Failure
B220 Onboard VGA - PCIe Link Width
Error
B221 Onboard LAN 1 – PCIe Link
Width Error
B222 Onboard LAN 2 – PCIe Link
Width Error
B260 Onboard VGA - PCIe Link Speed
Error
B261 Onboard LAN 1 – PCIe Link
Speed Error
B262 Onboard LAN 2 – PCIe Link
Speed Error
B2A1 Mezzanine Slot 1 - PCIE Link
Speed Error
B2A2 Mezzanine Slot 2 - PCIE Link
Speed Error
B2A3 Mezzanine Slot 3 - PCIE Link
Speed Error
B2A4 Mezzanine Slot 4 - PCIE Link
Speed Error
B2A8 PCI Slot - PCIE Link Speed
Error
B2AA I/O Blade PCI Slot - PCIE Link
Speed Error
B301 Expansion ROM not initialized
- Mezzanine Slot 1
B302 Expansion ROM not initialized
- Mezzanine Slot 2
B303 Expansion ROM not initialized
- Mezzanine Slot 3
B304 Expansion ROM not initialized
- Mezzanine Slot 4
B30A Expansion ROM not initialized
- I/O Blade PCI Slot
B330 Expansion ROM not initialized
- PCI Slot
162
Cause
option ROM.
PCI SERR was detected.
PCI PERR was detected.
detected on onboard VGA.
Connection failure of PCIe bus was
detected on onboard LAN1
Connection failure of PCIe bus was
detected on onboard LAN2
Link Width error was detected on
onboard VGA.
Link Width error was detected on
onboard LAN1.
Link Width error was detected on
onboard LAN2.
Link Speed error was detected on
onboard VGA.
Link Speed error was detected on
onboard LAN1.
Link Speed error was detected on
onboard LAN2.
Link Speed error was detected on
Mezzanine Slot 1.
Link Speed error was detected on
Mezzanine Slot 2.
Link Speed error was detected on
Mezzanine Slot 3.
Link Speed error was detected on
Mezzanine Slot 4.
Link Speed error was detected on
PCI Slot PCIE.
Link Speed error was detected on
I/O Blade PCI Slot.
Failed to expand option ROM of
Mezzanine slot 1.
Failed to expand option ROM of
Mezzanine slot 2.
Failed to expand option ROM of
Mezzanine slot 3.
Failed to expand option ROM of
Mezzanine slot 4.
Failed to expand option ROM of I/O
Blade PCI slot.
Failed to expand option ROM of PCI
Slot.
Express5800/B120f-h Maintenance Guide
1. Error Message of POST and Virtual LCD
Solution
If the device is not used as a boot device,
disable Option ROM Scan for that device.
Contact your sales representative.
Contact your sales representative.
Disable the expansion of option ROM for
the device that is not used as a boot
device.