LSI Software Configuration Utility and Universal RAID Utility
You can use Universal RAID Utility for configuration and management, monitoring of N8403-027
SATA interface card / N8403-026 RAID cotnroller after start up operating system.
The point to keep in mind when you use Universal RAID Utility together with LSI Software
Configuration Utility is as follows.
Terms
LSI Software Configuration Utility and Universal RAID Utility are different in term. When you use
Universal RAID Utility together with LSI Software Configuration Utility, please convert terms by
the following list.
Term of LSI Software
Configuration Utility
Adapter
Virtual Drive
Array
Physical Drive
NOTE:
For more information, refer to "Universal RAID Utility Ver2.0 User's
Guide".
Number and ID
The number to manage each component of RAID Controller used in the LSI Software Configuration
Utility is different from that in Universal RAID Utility, as shown in the table below. For more
information, refer to "Universal RAID Utility Ver2.0 User's Guide".
Item
Adapter (RAID Controller)
Virtual Drive (Logical Drive)
Array (Disk Array)
Physical Drive (Hard disk drive)
Term of Universal RAID Utility
RAID Viewer
RAID Controller
Logical Drive
Disk Array
Hard disk drive
raidcmd is a command that Universal RAID Utility provides.
Management Number
LSI Software
Configuration Utility
A number beginning with 0
A number beginning with 0
A number beginning with 0
A number beginning with 0
Configuring Your Server 4-39
raidcmd
RAID Controller
Logical Drive
Disk Array
Hard disk drive
Universal RAID Utility
A number beginning with 1
A number beginning with 1
A number beginning with 1
A number beginning with 1