Table of Contents
Advertisement
Chapter 2 Convenient Features
4.4
LSI Software RAID Configuration Utility and Universal RAID
Utility
Universal RAID Utility is available as a utility to configure, manage, and monitor the LSI Embedded MegaRAID
after the operating system starts.
The points to be noted when using the Universal RAID Utility together with the LSI Software RAID Configuration
Utility are described below.
(1)
Terms
Some terms are different between the LSI Software RAID Configuration Utility and Universal RAID Utility. When
using the Universal RAID Utility together with the LSI Software RAID Configuration Utility, replace the terms as
shown in the table below:
Terms of LSI Software RAID Configuration
Adapter
Virtual disk
Array
Physical drive
(2)
Management numbers
The numbers indicating RAID Controller information differ between the LSI Software RAID Configuration Utility
and Universal RAID Utility as shown in the table below.
For details about the differences in management numbers, refer to "Universal RAID Utility User's Guide".
Adapter (RAID Controller)
Virtual Drive (Logical Drive)
Array (Disk Array)
Physical drive (Physical Device)
Utility
RAID Controller
Logical Drive
Disk Array
Physical Device
Tips
raidcmd is a command provided by the Universal RAID Utility. For details, refer to
"Universal RAID Utility User's Guide".
Item
Starts from 0
Starts from 0
Starts from 0
Starts from 0
Express5800/R120d-1E, R120d-2E Maintenance Guide
Terms of Universal RAID Utility
RAID Viewer
RAID Controller
Logical Drive
Disk Array
Physical Device
Management Number
LSI Software RAID
Universal RAID Utility
Configuration Utility
Starts from 1
Starts from 1
Starts from 1
To be assigned based
on an enclosure that
contains the physical
device and its slot
number.
4. RAID System Configuration
raidcmd
109
Advertisement
Table of Contents
