3.
SPECIFICATIONS
3.1.
SERIAL VIDEO INPUTS
Standard:
1.485 Gb/sec SMPTE 292M (1080i/50, 1080i/59.94, 720p/50, and 720p/59.94) or
270 Mb/s SMPTE 259M (525/59.94 and 625/50) auto-detects standard
SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M
Connector:
2 BNC per IEC 61169-8 Annex A
Input Equalization: Automatic to 100m @ 1.5Gb/s with Belden 1694 or equivalent cable (Input A)
Automatic to 75m @ 1.5Gb/s with Belden 1694 or equivalent cable (Input B)
Return Loss:
>20 dB up to 270 MHz
>12 dB up to 1.5GHz
3.2.
RECLOCKED SERIAL VIDEO OUTPUTS
Standard:
Same as input
Number of Outputs: 3 outputs from input A, 1 output from input B,reclocked
Connector:
BNC per IEC 61169-8 Annex A
Signal Level:
800mV nominal
DC Offset:
0V ±0.5V
Rise and Fall Time: 200ps nominal for HD
600ps nominal for SD
Overshoot:
<10% of amplitude
Return Loss:
>20 dB up to 270 MHz
> 15 dB at 1.5 Gb/s
Jitter:
< 0.16UI (HD) or < 0.10UI (SD)
3.3.
DOWNCONVERTED SERIAL VIDEO OUTPUT
Standard:
SMPTE 259M-C (270 Mb/s)
Number of Outputs: 1
Connector:
BNC per IEC 61169-8 Annex A
Signal Level:
800mV nominal
DC Offset:
0V ±0.5V
Rise and Fall Time: 600ps nominal
Overshoot:
<10% of amplitude
Return Loss:
> 15 dB at 270 Mb/s
Jitter:
< 0.2 UI
3.4.
GENLOCK INPUT
Type:
NTSC or PAL Colour Black 1 V p-p
HD Tri-level Sync
Connector:
BNC per IEC 61169-8 Annex A
Termination:
High impedance or internal 75 ohm termination (jumper selectable)
7760VMS-HD HD Video Monitoring Splitter
Revision 0.3
7700 MultiFrame Manual
Page - 5