Main Menu - GLP impression X5 IP Bar 1000 User Manual

German Light Products®

Main menu

The following menus and commands are available in the impression X5 IP Bar 1000
control panel.
Menus
DMX Address
001-512
Control Mode
M1 Basic
M2 Normal
M3 Segment
M4 Multipix Advanced
M5 Multipix Compressed RGB
M6 Multipix Compressed RGBL
Protocol Setup
DMX
iQ.Mesh
Data In
CRMX
iQ.Mesh Unlink
Linking
options
CRMX (FPO) Unlink
Fixture Settings
RGB
Color Mix
RGBL
Mode
x;y
8000 K
6500 K
White Point
5600 K
4200 K
3200 K
FULL
Rec.2020
iQ.Gamut
Rec.709
DCI P3.65
Rev. 20230928-01
X5 IP Bar 1000
Notes
Set fixture's DMX start
address. Highest possible
address depends on
control mode.
Set fixture's DMX control
mode.
Control via DMX protocol
Control via GLP iQ.Mesh
Control via CRMX
(only available if CRMX
module is installed at
fixture's FPO port)
Unlink from GLP iQ.Mesh
link
Unlink from CRMX
(only available if CRMX
module is installed at
fixture's FPO port)
Direct RGB control, Lime
added automatically
Direct RGBL control
x:y color co-ordinate
control
Set fixture white point
when RGB is at 100%
(RGB Color Mix Mode only)
Maximum color gamut
Color space defined to
Rec.2020 Gamut (RGB
Color Mix Mode only)
Color space defined to
Rec.709 Gamut (RGB
Color Mix Mode only)
Color space defined to
DCI P3.65 Gamut (RGB
Color Mix Mode only)
33