The Menu Field - GLP impression x4 bar Instruction Manual

3 The Menu Field

You'll find the control board on the side part of the arm. It allows you
to make all necessary adjustments of the
With the Mode-key you get into the main menu. Afterwards you can
Navigate through the menu with the Up/Down-keys. Push the Enter-
key to get in the next menu level or to confirm your settings. Make
them and set functions ON/OFF with the Up/Down-keys. Confirm
and save it with the Enter-key (the display shows OK). Push the
Mode-key to cancel the entry and go back to the main menu.
To lock or unlock the keys of the menu field press Mode + Enter + Up simultaneously.
 MODE - ENTER 
Level1 Level 2
DMX Start
Address 001
Special
Set DMX
Mode
Compressed
Mode
Normal
Mode
Single Pixel
Mode
Position
feedback
Reverse Tilt
Reset
impression X4 BAR 10 manual (v1.1)
I M P R E S S
I M P R E S S
Level 3 Level 4
from software version: v0.26
GLP  German Light Products GmbH
I O N X 4 B a r
I O N X 4 B a r
.
Remark
Set the DMX start address
Advanced settings
Select the desired DMX Mode
Fixture works in "Compressed" mode  see also
section 4 below
Fixture works in "Normal" mode  see also
section 4 below
Fixture works in "Single Pixel" mode  see also
section 4 below
Switch automatic position feedback ON/OFF
Invert Tilt movements: ON/OFF
RESET and new calibration for all functions
9