GLP impression X5 IP Bar 1000 User Manual page 17

German Light Products®
Note: The HO and HQ CQC options are not available in RGBL Mode.
When the Color Mix Mode is set to RGBL, the different DMX Modes have the following
functionality:
● Mode 1 – Basic
Main Layer: RGBL control of all pixels as one group with individual Lime control.
-
● Mode 2 – Normal
Main Layer: RGBL control of all pixels as one group with individual Lime control.
-
Sub Layer: RGB control of all pixels as one group without automatically mixed
-
Lime. Lime is always 0%.
● Mode 3 – Segment
Main Layer: RGBL control of all pixels as one group with individual Lime control.
-
Sub Layer: RGB control of each segment without automatically mixed Lime.
-
Lime is always 0%.
● Mode 4 – Multipix
Main Layer: RGBL control of all pixels as one group with individual Lime control.
-
Sub Layer: RGB control of each pixel without automatically mixed Lime. Lime is
-
always 0%.
● Mode 5 – Multipix Compressed RGB
RGB control of each pixel with Lime mixed automatically.
-
● Mode 6 – Multipix Compressed RGBL
RGBL control of each pixel.
-
x:y Mode
x;y Mode lets you send x;y color coordinates to the fixture via DMX. The internal color
algorithm mixes the four LED colors perfectly to match the x:y color coordinates.
In x:y Mode, white point setting is disabled. CTC channel values overwrite x;y values.
When the Color Mix Mode is set to x:y, the different DMX Modes have the following
functionality:
● Mode 1 – Basic
Main Layer: x;y control of all pixels as one group
-
● Mode 2 – Normal
Main Layer: x;y control of all pixels as one group.
-
Sub Layer: RGB control of all pixels as one group with automatically mixed Lime.
-
● Mode 3 – Segment
Main Layer: x;y control of all pixels as one group.
-
Sub Layer: RGB control of each segment with automatically mixed Lime.
-
● Mode 4 – Multipix
Main Layer: x;y control of all pixels as one group
-
Sub Layer: RGB control of each pixel with automatically mixed Lime.
-
Rev. 20230928-01
X5 IP Bar 1000
17