4.8.3 ION Valency Setting
4.9 Electrode Lot No. Setting
HINT!
To delete a registered electrode lot No., tap
nothing, and tap
When the Ion species item is set to Customize,
enter the valency of the ion to be measured.
1.
Tap
2.
Tap
screen to set the ION valency.
3.
Tap
The setting applies.
To cancel the settings, tap
When an electrode lot No. is entered, the lot No.
can be displayed on data printouts or recorded
in saved data.
1.
Tap
2.
Enter the electrode lot No. in the numerical-key
screen.
Up to 8 digits can be entered.
To cancel the settings, tap
.
on the right of the ionic valence item.
or
in the ionic valence setting
.
on the right of the Electrode lot item.
on the right of the electrode lot No., enter
.
.
61