Measurement; Sample Setting - Horiba Scientific LAQUAtwin B-771 Instruction Manual

6

Measurement

6.1

Sample setting

The following 3-type sampling setting methods are available.
 Drop: for a small-amount sample
 Immersion: for a large-amount sample
 Scooping: for sampling a part of a sample
Note
 Although this product is waterproof, avoid immersing it
completely. If the product is accidentally dropped into water, take
it out of water and remove the moisture on it.
 Put an appropriate amount of the standard solution or a sample
into the measurement cell without bubbles inside. If not, the mea-
surement may be inaccurate.
Cell
 Drop
1.
Open the protection cover.
2.
Put some drops of sample into the
measurement cell.
Appropriate
Electrode
Cross-section of the measurement cell
12
Too little
Protection cover