Table of Contents
Advertisement
4.4 ION Measurement Setting
This section describes the procedures to set the conditions of ION measurement.
4.5 ION Measurement Unit Setting
56
1.
Tap the channel setting and the measurement
item in the MEAS screen to set "CH1" and "ION".
2.
Tap
and tap "CH1 MEAS SET".
3.
ION measurement setting items are displayed.
You will see the remaining items by dragging.
4.
Select items and set the CONDITIONS.
The setting procedures for each item are
explained below.
You can select g/L, mg/L, g/L, mmol/L or mol/L
as the ION measurement unit.
1.
Tap
on the right of the Unit item.
2.
Select the unit to set.
The selected unit applies.
Advertisement
Table of Contents
