Icons (Icon Bar) - Horiba Scientific LAQUA F-73A-S Instruction Manual

1.1.8 Icons (Icon Bar)

The icons displayed on the bottom of the touch panel allow you to set up the instrument,
check calibration information, and print out and save data.
Menu
Information
User's guide
Printer
Save in USB
Save data
2CH simultaneous graph
Trash box
Operation
Icon
Used to perform measurement, display the Meter
SET screen, and switch to the inspection and
application modes.
Used to check calibration information on the MEAS
or CAL screen, and application information on the
Meter SET screen.
Used to check operation instructions and
information about measurement and maintenance.
Used to print out measurement or calibration
values or saved data when a printer is connected.
Used to save measured data into a USB memory.
Used to save measurement values displayed on
the screen into the instrument.
Used to check both the measurement values of
CH1 and CH2 at the same time.
Used to delete calibration data or the data saved in
the instrument.
Used to start and stop the operations of
measurement and calibration, and to change to the
instantaneous value display.
The icon label depends on the corresponding
operation.
Function
5