Table of Contents
Advertisement
Chapter 5, FRONT PANEL OPERATION
5.3.22 Configuration Menu 2
5-36
The options menu is used to install additional firmware options and shows which
options are already fitted (note that currently there are no options available, but the
screen is provided to allow for future developments). If an option is purchased at the
same time as the instrument, then the factory will install it and no further action is
required. If however it is bought at a later date then the user will need to provide
details of the instrument's serial number with his order. In return, he will be given a
certificate with a unique eight-digit Option Key number that can be used to enable
the option in the instrument.
The controls on the Options Menu operate as follows.
INSTALL OPTION
Pressing this key displays the keypad icon. Enter the Option Key number you have
been given using the numerical keypad, and press the
symbol next to the option being installed in the list of available options on the right
hand side of the screen will change to a to indicate successful installation.
Pressing the Previous Menu key returns control to the Configuration Menu.
When the Configuration Menu 1 is displayed, pressing the Configuration 2 key
accesses the Configuration Menu 2, shown in figure 5-28.
Figure 5-27, Options Menu
to enter the number. The
Advertisement
Table of Contents
