Chapter 5, FRONT PANEL OPERATION
5-28
Figure 5-19, Configuration Menu, Single Reference Mode
The Configuration menu has four controls used to set the instrument's basic
operating mode and controls to adjust the noise measurement mode. Changes to the
setting of these controls can be made by using the adjacent
It is also used to access the Communications, Options, and Configuration 2 menus.
The relationship of these menus to Main Menu 1 is shown in figure 5-20. Note that
as with the main menu structure, shown in figure 5-1, it is possible to return to the
Main Display from any menu by pressing the Main Display key, but this has been
omitted from figure 5-20 for the sake of clarity.
Figure 5-20, Configuration Menu Structure
The controls on the Configuration menu operate as follows.
NOISE MEASUREMENT
This control is used to configure the instrument for noise measurements. When
keys.