Adc Menu - Ametek 7124 Instruction Manual

To use the user settings feature, proceed as follows:
Saving an Instrument Setting
Press the Save settings key, which will cause the Memory keys to appear.
Press either side of the
are to be stored. A message will be displayed while the settings are saved.
Restoring an Instrument Setting
Press the Restore settings key, which will cause the Memory keys to appear.
Press either side of the
settings are to be restored. A message will be displayed while the settings are
restored.
Deleting an Instrument Setting
Press the Delete memory key, which will cause the Memory keys or those
memories containing settings information to appear. Press either side of the
key next to the Memory number at which the settings are to be deleted. A message
will be displayed while this happens.
If the menu is inadvertently activated, pressing the Previous Menu key returns
control to Main Menu 2 without saving or restoring any settings.

5.3.31 ADC Menu

When Main Menu 2 is displayed, pressing the ADC Menu key accesses the ADC
menu, which is shown in figure 5-39.
Chapter 5, FRONT PANEL OPERATION
Figure 5-38, User Settings Menu -
Save Settings
key next to the Memory number in which the settings
key next to the Memory number from which the
5-49