Alert Tone - Kenwood NX-240 Function Reference

6 SOUND
6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed
Function
Call Request Tone
Call in Progress Tone
Disconnect Indication Tone
Volume Tone
(Mobile only)
Minimum Ch Beep
(Mobile only)
Configuration using KPG-169D/ KPG-170D
Configuring whether to emit the Control Tone from the transceiver (
Configuration using KPG-175D
Configuring the volume level of Control Tone (

Alert Tone

Alert Tone sounds from the transceiver when the transceiver receives a call by the Optional Signaling.
For Portable, whether to emit the Alert Tone can be configured using KPG-169D/ KPG-170D.
For Mobile, the volume level of Alert Tone can be configured using KPG-175D. (Refer to
Various Tones (Tone Volume) on page
Function
Special Alert Tone
Configuration using KPG-169D/ KPG-170D
Configuring whether to emit the Alert Tone from the transceiver (
Configuration using KPG-175D
Configuring the volume level of Alert Tone (
FUNC (K)/Ver 1.20
This tone sounds from the transceiver when the transceiver initiates an Individual Call Acknowledge
Request in an NXDN Conventional system. (Refer to
Has Been Initiated (Call Request Tone) on page
This tone sounds from the transceiver when the transceiver initiates an Individual Call Acknowledge
Request and becomes available for communication,
This tone sounds from the transceiver when the transceiver terminates an Individual Call Acknowledge
Request.
This tone sounds from the transceiver when the Volume Up or Volume Down key is pressed.
This tone sounds from the transceiver when the zone or channel having the lowest number is selected.
See
35.)
Table 6-4 Alert Tone
This tone sounds from the transceiver when the transceiver receives a call by the Optional Signaling.
A maximum of 8 types of tones can be arbitrarily configured or changed. (Refer to
Tone (Alert Tone Pattern) on page
See Edit > Optional Features > Common 2 > Tone Volume)
Description
Notifying the User with a Tone That a Call Request
64.)
Edit > Optional Features > Common 2 > Tone)
See
Edit > Optional Features > Common 2 > Tone Volume)
Description
31.)
See Edit > Optional Features > Common 2 > Tone)
Configuring the Volume Level of
Configuring the Alert
CONTENTS INDEX 28