Kenwood NX-240 Function Reference page 23

CONTENTS BY PURPOSE
Sound
Functions for
NXDN Conven-
tional System
Functions for Ana-
log Conventional
System
FUNC (K)/Ver 1.20
Tones Used for the Transceiver
Various tones sound from the transceiver
according to the operation of the transceiver.
6.1 Tones that Sound When a User Operates
the Transceiver or When the Transceiver
Status Is Changed
Making an Individual Call
A user can call an individual transceiver and
initiate voice communication.
8.3 Making an Individual Call/ Paging Call
Initiating an Individual Call After
Ensuring That the Target Party Is
Available for Communications
A user can initiate an Individual Call after
distinguishing that the receiving transceiver is
available for communications.
8.4 Initiating an Individual Call After Ensuring
That the Target Party Is Available for
Communications (Individual Call
Acknowledge Request)
Sending the GPS Data (Optional)
By using an optional GPS receiver unit, the
transceiver can send its own location information
to the base station.
8.10 Sending GPS Data
Making a Selective Call Using
Signaling
A user can initiate a selective call using signaling
such as 2-tone, FleetSync, and DTMF. Message
communications including a status message are
also available by using FleetSync.
9.4 Using 2-tone to Initiate a Selective Call
9.5 Using FleetSync to Initiate a Selective Call
9.6 Using DTMF to Initiate a Selective Call
Changing the Calling Alert Tone
The tone that sounds from the transceiver when
the transceiver receives an Individual Call or a
Group Call can be changed to the desired tone.
6.2 Tones that Sound When the Transceiver
Receives a Call
Page 26
Making a Group Call
A user can call a group of transceivers registered
as a call group, and initiate two-way voice
communication.
8.5 Making a Group Call
Page 58
Sending a Status Message
A user can send a simple message called a
status.
8.7 Sending a Status Message (Status Call)
Page 61
Avoiding Interference with Other
Communications
If a channel to be used for the transceiver to
transmit is being used by other parties, the
transmission of the transceiver on the channel is
automatically restricted.
Avoiding Interference with Other
Page 82
Communications (Busy Channel Lockout
(NXDN))
Sending the GPS Data (Optional)
By using an optional GPS receiver unit, the
transceiver can send its own location information
to the base station. GPS data can be sent by
using FleetSync.
10.7 Sending GPS Data
Page 100
Page 104
Page 104
CONTENTS
Page 31
Page 66
Page 72
Page 52
Page 121
INDEX xxi