Table of Contents
Advertisement
13
GPS FUNCTIONS
This chapter describes the common functions relevant to GPS data transmission.
The following functions are relevant to GPS data transmission:
•
GPS Report Mode
•
Number of Times
•
GPS Report Interval Time
•
GPS Time Mark
•
GPS Message Type
•
GPS Report on Data Zone-Channel
•
GPS Report Back to Requested ID
13.1
GPS Report Mode
GPS Report Mode can be used to send the GPS data automatically or send after receiving the command.
Refer to the following for details:
NXDN:
Sending GPS Data Automatically at Certain Intervals (GPS Report Mode) on page 83
Sending GPS Data According to the Request from the Base Station (GPS Report Mode) on page 83
FleetSync:
Sending GPS Data Automatically at Certain Intervals (GPS Report Mode) on page 122
Sending GPS Data According to the Request from the Base Station (GPS Report Mode) on page 122
13.2
Number of Times
Number of Times is the function to automatically send GPS data for the configured number of times when the transceiver
receives a transmission request for GPS data if "Poll" is configured for GPS Report Mode.
The transceiver sends GPS data for the number of times configured for Number of Times at the intervals configured for
GPS Report Interval Time.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the Number of Times (
FUNC (K)/Ver 1.20
See
Edit > Optional Features > GPS)
CONTENTS
INDEX
145
Advertisement
Table of Contents
