Indication And Display; Busy Led; Transmit Led; Selective Call Alert Led - Kenwood NX-240 Function Reference

5

INDICATION AND DISPLAY

The transceiver is equipped with the LED to be used for notifying a user of the transceiver status, such as transmitting or
receiving.
The timing to light or blink the LED or the color of the LED can be configured by using KPG-169D/ KPG-170D/ KPG-175D.
In addition, for Mobile, the LED display can be configured by using KPG-175D.
5.1

Busy LED

Busy LED is used to notify a user visually that the transceiver has received a signal.
The Busy LED lights green while the transceiver is receiving a signal.
Also, whether the Busy LED will light while the transceiver receives in Emergency Mode can be configured. (Refer to
Emergency LED on page 158.)
5.2

Transmit LED

Transmit LED is used to notify a user visually that the transceiver is transmitting.
The Transmit LED lights red while the transceiver is transmitting.
Also, whether the Transmit LED will light while the transceiver transmits in Emergency Mode can be configured. (Refer to
Emergency LED on page 158.)
5.3

Selective Call Alert LED

Selective Call Alert LED is used to notify a user visually that the transceiver has received various calls.
The LED blinks as follows when the transceiver receives a call using such signaling as DTMF, 2-tone, FleetSync, or
NXDN:
 Portable
The Busy LED blinks orange or blue.
 Mobile
The Busy LED blinks orange, or the LED blinks blue.
Whether to use the Selective Call Alert LED can be configured for each signaling. The color of the blinking LED can also
be configured for each signaling.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
• Configuring the Selective Call Alert LED (DTMF) (
• Configuring the Selective Call Alert LED (2-tone) (
• Configuring the Selective Call Alert LED (FleetSync) (
• Configuring the Selective Call Alert LED (NXDN) (
• Configuring the color of the LED of when receiving a call (DTMF) (
• Configuring the color of the LED while receiving a call (2-tone) (
Decode LED)
• Configuring the color of the LED while receiving a call (FleetSync) (
• Configuring the color of the LED while receiving a call (NXDN) (
Alert LED Color)
FUNC (K)/Ver 1.20
Edit > DTMF > Decode)
See
Edit > 2-tone > Decode (2-tone 1 to 3))
See
Edit > FleetSync > General 2 > LED)
See
Edit > NXDN > Conventional)
See
Edit > DTMF > Decode > LED)
See
See Edit > 2-tone > Decode (2-tone 1 to 3) >
Edit > FleetSync > General 2 > LED)
See
Edit > NXDN > Conventional >
See
CONTENTS INDEX 19