Kenwood NX-240 Function Reference page 137

10 FleetSync
10.4 Making a Selective Call/ Paging Call
Call Type
This function is used to initiate a call to a party having a FleetSync ID in the same Fleet.
Fleet Call The transceiver determines that the received call is a Fleet Call when receiving a Selective Call having the ID
configured as "0 (ALL)" and the same Fleet.
This function is used to initiate a call to a party having the same ID in each Fleet.
Supervisor Call The transceiver determines that the received call is a Supervisor Call when receiving a Selective Call having the
Fleet configured as "0 (ALL)" and the same ID
This function is used to initiate a call to all transceivers having a FleetSync ID.
Broadcast Call The transceiver determines that the received call is a Broadcast Call when receiving a Selective Call having the
ID configured as "0 (ALL)" and Fleet configured as "0 (ALL)".
Receiving a Selective Call/ Paging Call
Conditions for the FleetSync ID to match are as follows:
Note
To receive a Selective Call, "FleetSync" must be configured as the Optional Signaling used on the channel. (Refer to
Optional Signaling (Analog) on page
Transceiver Behavior
1
Receive a Selective Call.
An Alert Tone (Individual Call, Other Selective Calls, or Paging Call) sounds from the transceiver. If Selective Call Alert LED is
enabled, the LED blinks orange or blue.
By pressing the PTT switch while the Auto Reset Timer is counting down, the transceiver can respond (Talkback) to the
transceiver which made the Individual Call or Paging Call.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
• Configuring the Alert Tone (Individual Call) (
• Configuring the Alert Tone (Other Selective Calls) (
• Configuring the Alert Tone (Paging Call) (
• Configuring the LED (Individual Call/Group Call) (
• Configuring the LED (Other Selective Calls) (
FUNC (K)/Ver 1.20
Table 10-4 Conditions to Unmute the Speaker
Conditions to Unmute the Speaker
Call Type
Fleet
fff: 100 to 349
Individual Call Match
Group Call Match
Fleet Call Match
Supervisor Call ALL Fleet
Broadcast Call ALL Fleet
94.)
See Edit > FleetSync > General 2 > Alert Tone)
See
See Edit > FleetSync > General 2 > Alert Tone)
See
See Edit > FleetSync > General 2 > LED)
Description
ID
iiii: 1000 to 4999
Match
Group ID matches
ALL ID
Match
ALL ID
Edit > FleetSync > General 2 > Alert Tone)
Edit > FleetSync > General 2 > LED)
CONTENTS
Using the
INDEX 112