Table of Contents
Advertisement
21 MODE
21.3 Testing or Adjusting the Transmit and Receive Capabilities of the Transceiver (PC Test Mode/ PC Tuning Mode)
21.3
Testing or Adjusting the Transmit and Receive Capabilities of
the Transceiver (PC Test Mode/ PC Tuning Mode)
PC Test Mode can be used to test transmit and receive capabilities of the transceiver by using KPG-169D/ KPG-170D/
KPG-175D.
PC Tuning Mode can be used to adjust transmit and receive capabilities of the transceiver by using KPG-169D/
KPG-170D/ KPG-175D.
To test or adjust the transceiver in each mode, the transceiver and a PC with KPG-169D/ KPG-170D/ KPG-175D installed
need to be connected by using the programming cable. (Refer to
After connecting the transceiver and the PC, selecting "Test Mode" from the Program pulldown menu in the main window
of KPG-169D/ KPG-170D/ KPG-175D opens the Test Mode dialog box. By selecting an item from the tuning item list in the
Test Mode dialog box and double-clicking it, the tuning dialog box of the selected item opens.
Note
Refer to the service manual for operating the transceiver in PC Test Mode and PC Tuning Mode, and instructions on how to adjust
transmit and receive capabilities.
FUNC (K)/Ver 1.20
2.1 Connecting the Transceiver to a PC on page
Figure 21-1 Test Mode Dialog Box
CONTENTS
INDEX
4.)
196
Advertisement
Table of Contents
