Table of Contents
Advertisement
12 DTMF
12.5 Redialing/ 12.6 Sending a PTT ID
12.5
Redialing
Supported Models: Mobile
A previously sent DTMF code can be sent again.
Operating the Transceiver
1
Press the
Autodial
The transceiver enters Autodial Mode. "Ad" appears on the LED display.
2
Press the
[0]
key.
"rd" appears on the LED display and the previously sent DTMF code is selected.
To cancel the operation, the Triangle key needs to be pressed.
3
Press the
PTT
switch.
The transceiver sends the DTMF code.
Configuration using KPG-175D
•
Assigning functions to the PF keys (
•
Configuring the Keypad Operation (
12.6
Sending a PTT ID
A PTT ID is an unique identification code of the transceiver transmitted by pressing or releasing the PTT switch.
The administrator or dispatcher can identify by a PTT ID who is using a channel without asking by voice for the caller's
name.
PTT ID Type
PTT ID Type is the type of PTT ID to be sent.
To send a DTMF code as the PTT ID, "DTMF" must be configured for PTT ID Type by using KPG-169D/ KPG-170D/
KPG-175D. And the DTMF code to be sent needs to be configured in accordance with the configuration of the timing for
sending the PTT ID. (Refer to
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the PTT ID Type (
FUNC (K)/Ver 1.20
key or the
[*]
key on the microphone keypad.
See
Edit > Key Assignment)
Edit > Key Assignment > Microphone Key)
See
Timing for Sending the PTT ID on page
See
Edit > Zone Information > Channel Edit > Page 2)
137)
CONTENTS
INDEX
136
Advertisement
Table of Contents
