Table of Contents
Advertisement
12 DTMF
12.2 Sending the DTMF Code While Transmitting (Manual Dialing)/ 12.3 Sending the DTMF Code by Pressing a Key on the
12.2
Sending the DTMF Code While Transmitting (Manual Dialing)
Supported Models: Mobile
If Manual Dialing is enabled, the DTMF code corresponding to a particular key on the microphone keypad can be sent
when pressing the key while transmitting by pressing the PTT switch.
Operating the Transceiver
1
Press the
PTT
switch.
2
Press the key corresponding to the DTMF code to be sent.
The transceiver sends the DTMF code.
3
Repeat Step 2 as necessary.
Configuration using KPG-175D
Configuring the Manual Dialing to be enabled or disabled (
12.3
Sending the DTMF Code by Pressing a Key on the Microphone
Keypad without Using the PTT Switch (Keypad Auto PTT)
Supported Models: Mobile
If "Keypad Auto PTT" is configured for Keypad Operation, the transceiver can immediately initiate transmission by pressing
a key on the microphone keypad and send the DTMF code corresponding to the key. This function can be used to send the
DTMF code by pressing keys on the microphone keypad without pressing the PTT switch.
Operating the Transceiver
1
Press the key corresponding to the DTMF code to be sent.
The transceiver sends the DTMF code.
2
Repeat Step 1 as necessary.
Configuration using KPG-175D
Configuring the Keypad Operation (
FUNC (K)/Ver 1.20
See
Edit > Key Assignment > Microphone Key)
See
Edit > DTMF > Encode)
CONTENTS
INDEX
134
Advertisement
Table of Contents
